Categories
recycling

Cardboard recycling with help of 3D printer

I stack & stock cardboard as much as possible. It is such a great material, I just hate to trow it away.

I got inspired by XYZAidan’s – Recycle Cardboard into Anything with 3D Printing! to finally do something more that just hoard. Basically I followed all of instructions to learn the process.

First I printed 3 part molds on yet unfinished, heavily modified CR10 (aka. Spartan3k)

I’ve hand sliced than used blender to prepare paste. This time I’ve used PVC glue as it was the easiest.

I’ve got vice and quick grip clamps in other location so I improvised with long wood screws and some wood from the garden…

I also did have some molds for concrete pots laying around, I’ve made some more of cardboard pate and squeezed it in to the mold. As they were not modeled for this purpose I just tried to press then as much as possible but I was nowhere close to above 3 part mold.

on the left you can also see some plastic container with plastic cap from liquid lubricant as a guerrilla mold

After two or three days of drying in molds I’ve taken it out very gently. It was still quite wet but was stable enough.

After that I’ve left it for few more days close to dehumidifier. Once dried it is solid, feels sturdy but I have not tried to destroy it. Here you can see results in use, in some context

Next steps

  • Make some original molds
  • Try using rice paste for bonding agent
  • Try making pots for starting and transplanting plants into the soil. Will they hold long enough ? As it is fine for then to disintegrate in soil, as long as they can hold plant for initial 1-2 weeks.
  • Repeat process few more time to get some better understanding

Generally I am happy with the results and will try some more !!

Categories
3d printing

Xbox one wall hanger

Late night moments when you look at a 3D printer that is about to sit idle, bored for next few hours and you think to your self “… well I can model this thing quickly”. That how Xbox one pad wall hanger came to be.

Model is super simple, I printed it on a side to avoid supports.

It had been attached to the wall with 3M dual side tape

It works and is functional.

What didn’t work:

  • Part of letters is too small, especially “< /dev/null”
  • Not to easy to take pad with one hand, it’s really two hands operation

Both of these issues could and will be addressed, I got 4 more Steam controllers to go 🙂

Categories
mpcnc

MPCNC 666 – table cover 0.2

Well before I will have any proper dust collection wanted to close the box as its dusty as hell when cutting MDF. Designed and 3D printer some brackets but decided to just change the legs to longer ones.

I’ve cut some grooves with manual router to allow to polycarbonate greenhouse sheets to slide in.

Top is not finished yet, but just laying down 2 sheets did the job for now.

Top will have some more 2×4’s and in the middle will attach dust collector hose in later stages.

Categories
Uncategorized

MPCNC 666 – first cut with router

Eager to get something going followed EstlCam basic guide from V1 Engineering and here are the results.

Used Inkscape to draw the shape.

Also before all that added polycarbonate greenhouse sheets, that were definitely not enough.

I’ve mounted MDF board with some screws.

Categories
mpcnc

MPCNC 666 – table – no dust under

Be cause my table have 2 shelfs under MPCNC work area I didn’t want any chips and dust falling down. Got some leftover polycarbonate greenhouse sheets from making 3D printer enclosure that were used here.

Screwed them down in place with you guessed it – screws and sealed with some awful smelling silicone.

Categories
Uncategorized

MPCNC 666 – table build – Episode 0.1

Having MPCNC on the floor was now fun. Time has come to build a table. Decided to go with GeoDave’s parametric table

Aim for MPCNC was to have 666x666mm working space. In practice there’s less to work with. Below dimensions for machine:

For table went with 42″x42″ and 45″ height so that I can fit 3D printer case that I build earlier and have one shelf for some CNC bits.

2×4’s that I used were scraps that were sitting on top of the roof for some time now, I was not concerned with first table. Was pretty sure that it wont be perfect the first time. Wanted to make it quick, make mistakes, learn and then iterate.

Following they some one trow away plywood pallet, did not hesitated to grab it and start making shelf out of it strait away.

Thanks to that fortunate find, and unfortunate life of a pallet I was able to place Ender 3 case on newly screwed still bit wet shelfs.

Pretty happy with the table for now. Of course it is not over…

Categories
Uncategorized

Welcome to 2FD5 ~/

Welcome to 2FD5 website. I’ve intend to document some of my projects here.

Stay tuned for more updates…